The series consists of  86 Draw-Through models with one to five fans.

Short description:
Capacity range: 0.7 to 32kW at tL1= ±0°C, DT1 = 8K
Fin spacing: 4.5 / 7.0 and 12.0 mm
Airflow: 620 to 12900 m³/h
Temperature application range: -35°C to +10°C

Suitable for all halogen refrigerants such as R134a, R404A, R507 and R22 in a very large application range, especially for sensitive and non-packed goods.
Standard version for direct expansion and brine. Special designs and NH3 types on request.

Küba CAL® distributor for multiple injection
What can it do for you? The entire cooling tube system is uniformly used, particularly with partial loads. Furthermore, minimal temperature differences can be attained

Air guiding grids for straightened air flow
What can it do for you? Optimal air capacity in the room, high air throw and improved motor ventilation

The specifically selected air/surface ratio avoids not only high product weight loss, it also leads to extremely long service life and therefore to lower defrost frequency rates. Please contact our sales department and ask about the selection of components.